Skip to main content
All CollectionsTelnyx Number Management GuidePorting Articles and GuidesPorting to Telnyx
Porting + Bundles
Porting + Bundles

Learn how to pre-configure your porting order with Bundles. Start building on Telnyx today.

Telnyx Engineering avatar
Written by Telnyx Engineering
Updated over 5 months ago

Bundles is a new pricing option being offered by Telnyx.

Here's how you can pre-configure your porting order with bundles:

Couple of notes:

  • You may pre-configure bundles on your porting order at any point as long as the order hasn't completed (i.e. it is in a cancelled or ported status)

  • A bundle is not actually applied to a phone number until after the phone number ports in. After pre-configuring a bundle with a port order, be careful not to use that same bundle in a number order.

  • If an order is already ported, you cannot use porting tooling to associate bundles

  • Please ensure that the bundle is eligible for your port order (i.e. a US bundle being pre-configured with US phone numbers). If the bundle is not eligible for your port order (i.e. a US bundle being pre-configured with an Australian phone numbers), then you will be unable to pre-configure it.

Through the Telnyx Portal

  1. Navigate to the Port Numbers page in the Telnyx Portal

  2. Click on any order that you would like to pre-configure bundles with.

    1. By clicking on the order, you will open up the Port In Details page for that order

  3. Scroll to the bottom of the page Port In Details page.

    1. There should be a Pre-configure Bundles button.

    2. Click on that button
      ​

      Porting requirements example

Preconfigure Bundles

  1. A modal will pop up on the page. There are 2 tabs on the modal: List and Add. By default, the modal will load on the List tab

    1. List: Lists the pre-configurations you have already created. If you haven't pre-configured any bundles on the order, it will be an empty table (like the image below)

    2. Add: Create new pre-configurations for bundles and phone numbers on your order.
      ​

      Preconfiguring bundles

  2. Click on the Add tab.
    ​

    Pre configuring list add

  3. Specify a phone number from the port order, and the bundle you would like to pre-configure with it. Then click Create
    ​

  4. The pre-configuration will now appear on the List page.

    1. Repeat steps 5-6 for every phone number you wish to pre-configure a bundle with on your porting order

    2. If you want to change the bundle associated with a particular phone number, click on the trash can in the Delete column to delete the pre-configuration. And then repeat steps 5-6 for that phone number
      ​

      Unique bundle ID example

  5. When your order ports, the pre-configured bundles will automatically be applied with the specified phone numbers. You are all set!

Using the Porting API

You can follow this developers guide to integrate with the porting API for pre-configuring bundles to port orders

Related Articles
Porting Policy & Procedure
Automated Port Request Validation
Port your Google Voice/Skype Numbers
Automating Ports With Programmatic API
Flyingvoice: Telnyx Setup
Did this answer your question?