Audiocodes Session Border Control (SBC) devices deliver seamless connectivity, enhanced security and quality assurance for your VoIP network. This family of SBCs can support both an enterprise environment or a service provider core.
In the enterprise environment, SBCs form an effective demarcation point between the business’s VoIP network and the service provider’s SIP trunk, performing SIP protocol mediation and media handling (interoperability), and securing the enterprise VoIP network.
In the service provider core, AudioCodes SBCs can function as peering SBCs between operator networks or as access SBCs delivering security and protocol normalization.
This SBC lineup includes a range of platforms that offer cost-friendly session border control and hybrid functionality (SIP to TDM, SIP to SIP).
Instructions for Configuring Audiocodes SBC with Telnyx
In this activity you will:
Ensure that your Telnyx Mission Command Portal is configured properly
RECOMMENDED: Enable TLS to encrypt your traffic
Have your SBC already set up with your IP-PBX, with one or more clients configured and running calls between them
Setting up your Telnyx SIP portal account so you can make and receive calls:
Note: Video walkthrough for Audiocodes SBC/Telnyx configuration coming soon. Check back as we update our docs.
1. Configure your AudioCodes SBC using INI
Define your IP Group:
[ IPGroup ]
[ \IPGroup ]
Define your SIP Proxy:
[ ProxyIp ]
FORMAT ProxyIp_Index = ProxyIp_IpAddress, ProxyIp_TransportType, ProxyIp_ProxySetId;
ProxyIp 1 = "184.108.40.206/32:5060", 0, 1;
ProxyIp 2 = "220.127.116.11/32:5060", 0, 1;
[ \ProxyIp ]
[ CodersGroup0 ]
[ \CodersGroup0 ]
Note: Depending on your requirements, you may need to set more configurations such as IP profiles and Routing.
That's it! You have successfully configured your Audiocodes SBC with Telnyx.
Review our getting started with guide to make sure your Telnyx Mission Control Portal account is setup correctly!
Additionally, check out:
Can't find what you're looking for? Click the chat bubble at your lower right hand corner and start a chat!
*Note that you must be logged into your Mission Control Portal in order to interact with the chat bubble.