The Gigaset A510 IP is an exceptionally versatile VoIP phone with the ability to make up to 3 parallel calls, either via Internet or traditional landline. It allows a caller to switch between 2 VoIP calls and 1 fixed line call at the press of a button.
Instructions for setting up and configuring your Gigaset A510 IP
In this activity you will:
Ensure that your Telnyx Mission Command Portal is configured properly
RECOMMENDED: Enable TLS to encrypt your traffic
Setting up your Telnyx SIP portal account so you can make and receive calls:
Note: Video walkthrough for Gigaset A510 IP/Telnyx configuration coming soon. Check back as we update our docs.
1. Get your device's IP address and log into the Gigaset phone's web portal
In this step, you'll obtain the IP address from your A510, which you'll need to log into the web portal in the next step.
Press the paging button on your device's base station. This will display the device's IP address. Take note of this as you'll need it next.
On a computer connected to the same network as your phone, open a browser and type http:// followed by the IP address you obtained in step 1.
The first screen that appears will require you to enter a system PIN. The default PIN for all new devices is 0000.
2. Configure your IP phone
From here, click on the Settings tab at the top of the page.
Click on the Telephony link on the left-hand navigation to expand this menu. Click on Connections in the Telephony sub-menu and click Edit next to the line you want to configure.
Enter the following information:
Connection Name or Number: Create a connection name suitable for your connection.
Connection Name or Number: Choose a name that makes sense for the connection you're setting up.
Authentication Name: Your Telnyx SIP account username
Authentication password: Your Telnyx SIP account password
Username: Your Telnyx SIP account username
Display name: Your Telnyx SIP account username
Proxy server address: sip.telnyx.com
Proxy server port: If you are using UDP transport, use port 5060. If you are using TLS transport, use port 5061.
Registration server: sip.telnyx.com
Registration server port: If you are using UDP transport, use port 5060. If you are using TLS transport, use port 5061.
Registration refresh time: 300
STUN enabled: No
STUN server address: (Leave Empty)
Outbound proxy mode: Always
Outbound server address: sip.telnyx.com
Outbound proxy port: If you are using UDP or TCP transport, use port 5060. If you are using TLS transport, use port 5061.
Select Network Protocol: By default, UDP is selected. If you enabled TLS and your account is configured to use SRTP encryption as part of your pre-requisite activities then you should choose TLS.
*Note that this screenshot shows a UDP setup.
Still in the Telephony section, click on Number Assignment and find the Handsets section. Look for the line you just created (It will have the same name as the Connection Name or Number field you configured previously.
for outgoing calls: Radio button should be CHECKED
for incoming calls: Checkbox should be CHECKED
That's it! You've finished configuring your Gigaset A510 IP profile, and can now start testing calls!
Review our getting started with guide to make sure your Telnyx Mission Control Portal account is setup correctly!
Additionally, check out:
Can't find what you're looking for? Click the chat bubble at your lower right hand corner and start a chat!