X6U HIGH-END IP PHONE
Featuring three color displays, newly added line keys with LED light and built-in Bluetooth, the Fanvil X6U provides the direct access to instructions, aiming to offering greater flexibility, productivity, to exceed the different demands of businesses. Wideband codec of G.722 and Opus in this device delivers you an immersive HD audio experience in both high band and low band with the network.
Product features:
| X5U HIGH-END/X5U SPECIAL RED IP PHONE
Featuring two color displays and newly added line keys with LED light, the Fanvil X5U provides the direct access to instructions, aiming to offering greater flexibility, productivity, to exceed the different demands of businesses. Wideband codec of G.722 and Opus in this device delivers you an immersive HD audio experience in both high band and low band with the network.
|
X4U ENTERPRISE IP PHONE
The Fanvil X4U provides the direct access to instructions with two high-resolution 320x240 color displays, which is an ideal option for enterprises to improve the flexibility and have a greater productivity on daily work. Wideband codec of G.722 and Opus in this device delivers you an immersive HD audio experience in both high band and low band with the network.
Product features:
| X3U ENTERPRISE IP PHONE
As an ideal cost-effective Gigabit IP phone, the Fanvil X3U provides the direct access to instructions with the intuitive design of high-resolution color display and newly increased line keys, offering you greater flexibility, productivity, to exceed the different demands of businesses. Wideband codec of G.722 and Opus in this device deliver you an immersive HD audio experience in both high band and low band with the network.
Product features:
|
X3U PRO ENTRY LEVEL IP PHONE
The Fanvil X3U Pro is an entry-level color screen IP Phone. With HD audio, 2.8” main color display, 6 SIP lines, local 6-way conference call and other extended features like EHS headset, it provides the high-quality and convenient experience for users at an affordable price.
Product features:
| Additional resources:
|
Additional resources:
Firmware:
XU user manual (For all phones in this series)
Instructions for setting up and configuring your Fanvil XU series IP phone
In this activity you will:
(Optional) Upload a TLS certificate
Pre-requisites
Ensure that your Telnyx Mission Command Portal is configured properly
RECOMMENDED: Enable TLS to encrypt your traffic
Make sure your phone is running the latest firmware (see the Additional resources section above.)
Make sure you can log into the web GUI. Refer to the 7.5 Web Management section of your phone's user manual for instructions.
Video Walkthrough
Setting up your Telnyx SIP portal account so you can make and receive calls:
SIP account registration tutorial for Fanvil IP phones:
1. Configure a line with a Telnyx SIP trunk
In this step you'll configure your first Telnyx SIP trunk via the phone's web interface or device screen. This guide focuses on the web interface. If you are using the phone screen, follow the instructions in the pre-requisite section and use the parameters in this section.
Log into your web GUI and navigate to Line > SIP.
Use the Line dropdown to select a SIP line to configure, and provide the following:
In the Register Settings section:
Username: The SIP connection username. Learn more here in the Credentials Connection Setup section.
Display Name: This is your caller ID. You can choose whatever you like, but keep in mind the following naming conventions:
Caller ID Name should be in capital letters. This will appears more clearly/visible on some devices.
You must NOT use any special characters, as they will not be displayed. Spaces are allowed.
Some of regular Canadian providers will not show more than 15 characters. We suggest shrinking or adapt your caller ID.
Realm: Enter the name of the realm to which the SIP interface is connected.
Authentication Name: The SIP connection username. Learn more here in the Credentials Connection Setup section.
Authentication Password: The SIP connection password. Learn more here in the Credentials Connection Setup section.
Server Name: sip.telnyx.com (For international, see this document.)
In the SIP Server 1 sub-section:
Server Address: sip.telnyx.com (For international, see this document.)
Server Port: If you are using TCP or UDP transport, use port 5060. If you are using TLS transport, use port 5061.
Transport Protocol: Choose TCP or UDP unless you are encrypting traffic and have set up encryption on your Telnyx portal. In this case, choose TLS.
You can now configure the SIP Server 2 section if you want.
2. Configure voice and video settings
In this section, you'll add codecs to your phone configuration that will support optimal audio and video.
From the line you configured in step 1, expand the Codecs Settings section.
From here, you can set the priority and availability of audio and video codecs by adding or removing them from the list. The following is a list of codecs (both audio and video) that Telnyx supports:
Audio:
ulaw(g711u)
alaw(g711a)
g722
g729
Video:
H264
3. (Optional) Upload a TLS certificate (For encrypted connections)
If you are encrypting traffic with TLS, you'll need to upload a TLS certificate, which you'll do in this section.
In the Lines > SIP section, find the Advanced Settings sub-section:
DTMF Type: RFC 2833
Transportation Protocol: Choose TCP or UDP unless you are encrypting traffic and have set up encryption on your Telnyx portal. In this case, choose TLS.
Note that if you are encrypting traffic, you'll need to go into Lines > Dial Peer and make sure the Port setting is changed to 5061.RTP Encryption: (Optional) Enable this if you're using TLS
RTP Encryption Key: (Optional) Obtain a key here
Navigate to Line > Basic Settings and find the STUN Settings section and set:
TLS Certification File: Obtain a certificate here.
That's it, you've now completed the configuration of your Fanvil XU series IP phone with your Telnyx account.
Additional Resources
Review our getting started guide to make sure your Telnyx Mission Control Portal account is set up correctly.
Additionally you can check out:
Firmware:
XU user manual (For all phones in this series)