As a WiFi IP phone with HD audio, the Fanvil H3W can deliver you a smoother communication experience without cabling troubles. More than a hotel IP phone, it is also suitable for the supermarket, hospital, shopping mall, etc.
Product Features
| As a WiFi IP phone with HD audio, Fanvil H5W can deliver you a smoother communication experience with HD audio and no cabling troubles. Fanvil H5W supports H.264 video decoding to help owners to view the video image before opening the door. More than a hotel IP phone, it is also suitable for the supermarket, hospital, shopping mall, etc.
Product Features
|
Additional resources:
Instructions for setting up and configuring your Fanvil H3W/H5W WiFi IP Phone
In this activity you will:
Pre-requisites
Ensure that your Telnyx Mission Command Portal is configured properly
RECOMMENDED: Enable TLS to encrypt your traffic
Make sure you can log into the web GUI. This is where you'll configure your SIP trunk. Each phone is shipped with its own administrator account. The first time you log into the web GUI, use the default credentials:
Username: admin
Password: admin
Video Walkthrough
Setting up your Telnyx SIP portal account so you can make and receive calls:
SIP account registration tutorial for Fanvil IP phones:
1. Configure a line with a Telnyx SIP trunk
In this step you'll configure your first Telnyx SIP trunk via the phone's web interface or device screen. This guide focuses on the web interface. If you are using the phone screen, follow the instructions in the pre-requisite section and use the parameters in this section.
Log into your web GUI and navigate to Line > SIP.
Use the Line dropdown to select a SIP line to configure, and provide the following:
In the Register Settings section:
Username: The SIP connection username. Learn more here in the Credentials Connection Setup section.
Display Name: This is your caller ID. You can choose whatever you like, but keep in mind the following naming conventions:
Caller ID Name should be in capital letters. This will appears more clearly/visible on some devices.
You must NOT use any special characters, as they will not be displayed. Spaces are allowed.
Some of regular Canadian providers will not show more than 15 characters. We suggest shrinking or adapt your caller ID.
Realm: Enter the name of the realm to which the SIP interface is connected.
Authentication Name: The SIP connection username. Learn more here in the Credentials Connection Setup section.
Authentication Password: The SIP connection password. Learn more here in the Credentials Connection Setup section.
Server Name: sip.telnyx.com (For international, see this document.)
In the SIP Server 1 sub-section:
Server Address: sip.telnyx.com (For international, see this document.)
Server Port: If you are using TCP or UDP transport, use port 5060. If you are using TLS transport, use port 5061.
Transport Protocol: Choose TCP or UDP unless you are encrypting traffic and have set up encryption on your Telnyx portal. In this case, choose TLS.
You can now configure the SIP Server 2 section if you want.
2. Configure voice and video settings
In this section, you'll add codecs to your phone configuration that will support optimal audio and video.
From the line you configured in step 1, expand the Codecs Settings section.
From here, you can set the priority and availability of audio and video codecs by adding or removing them from the list. The following is a list of codecs (both audio and video) that Telnyx supports:
Audio:
ulaw(g711u)
alaw(g711a)
g722
g729
Video:
H264
That's it, you've now completed the configuration of the Fanvil H3W/H5W WiFi IP Phone with your Telnyx account.
Additional Resources
Review our getting started guide to make sure your Telnyx Mission Control Portal account is set up correctly.
Additionally you can check out: