How to configure a GoAutoDial PBX IP Trunk

Our focus in this article is to achieve the connection between your GoAutoDial server, and our Mission Control Portal. We will describe a sample configuration of the OUTBOUND, and INBOUND trunk assuming that you already made the main GoAutoDial installation and telecommunication-applications deployment.

Once you have configured the following steps, you can take advantage of leveraging our Mission Control Portal to maximize your business operations.

Your trunk is ready to go on our side! We can move forward with the configurations on your GoAutoDial trunk:

  • On your GoAutoDial Dashboard page under "Admin Settings/Carrier" click on "Add New Carrier" and then select Manual as the Carrier Type. Provide the following parameters and then click "Submit" once completed:

  • After completing the above step you will have to activate the trunk and add a dial plan to the trunk. On your Dashboard page under "Admin Settings/Carrier/Action" click on "MODIFY CARRIER" for you carrier trunk you created moments ago. Then select "ADVANCE CONFIGURATION" and supply the following parameters:

  • Account Entry:

  • Dialplan Entry:

exten => _X.,1,AGI(agi://
exten => _NXXNXXXXXX.,1,Dial(SIP/${EXTEN}@telnyx)
exten => _1NXXNXXXXXX.,1,Dial(SIP/${EXTEN}@telnyx)
exten => _6468688074,1,Dial(SIP/8001@default)
exten => _16468688074,1,Dial(SIP/8001@default)

On your Dashboard page under "Admin Settings/Phones/ACTION" click on "MODIFY PHONE 800X" with the following parameters.

  • NoteYou can supply a DID from your portal account to the "Outbound CallerID" field of the phone extension. In this example the DID is 6468688074.

  • Under "Telephony/Inbound/Phone Numbers (DIDs/TFNs)" click on Add new DID and provide the following parameters:

Please use a DID from your portal account and the phone extension you wish to receive inbound calls to.

Your GoAutoDial IP trunk should now be ready!

Can't find what you're looking for? Click the chat bubble at your lower right hand corner and start a chat!

Did this answer your question?