OSDial is a popular full-featured predictive dialer, that uses Open Source licenses to greatly reduce the cost without sacrificing quality or functionality. Able to dial in every imaginable way, this is the most flexible and cost-effective dialer available today.
Additional documentation:
Instructions for configuring an IP trunk between OSDial and Telnyx
In this activity you will:
Pre-requisites:
Ensure that your Telnyx Mission Command Portal is configured properly
RECOMMENDED: Enable TLS to encrypt your traffic
Video Walkthrough
Setting up your Telnyx SIP portal account so you can make and receive calls:
Note: Video walkthrough for OSDial/Telnyx configuration coming soon. Check back as we update our docs. |
1. Create a SIP trunk
In this section, we will create a SIP trunk between OSDial and your Telnyx account.
Log into the OS dial web portal and going to Admin > Carriers > Add new carrier and provide the following information:
Carrier ID: Telnyx
Carrier Name: Telnyx
Registration String: leave blank
Template ID: None
Account Entry: Telnyx
Disallow: all
Allow: ulaw
Allow: G 729
Type: Peer
Insecure: port,invite
Host: sip.telnyx.com
DTMFMode: RFC 2833
Context: default
Protocol: SIP
Global String: Telnyx=SIP/telnyx
Dial Plan: exten => _9NXXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9NXXXXXXXXXX,2,Dial(${Telnyx}/${EXTEN:1},60,tTor)
exten => _9NXXXXXXXXXX,3,Hangup
In this case, 9 is the prefix that will be dialed to send calls to Telnyx's trunk.
That's it! You're now ready to start making calls with OSDial using Telnyx as your service provider.
Additional Resources
Review our getting started with guide to make sure your Telnyx Mission Control Portal account is setup correctly!
Additionally, check out: