How to configure Zoiper 3 with Telnyx Mission Control Portal

Prerequisites

Zoiper is a softphone client that can be downloaded and installed on different platforms; such as mobile devices or computers.

You'll need to have created a credentials based connection on your Telnyx Mission Control Portal account, assigned this connection to a DID and outbound profile in order to make and receive outbound calls. This provides you with the username and password you will use to register Zoiper 3 with Telnyx.

Instructions

Download

You can download the classic Zoiper versions from here. This softphone client can be used on many different platforms such as linux, windows and mac!

Installation

Instructions for installation on each platform can be found here.

Video Walkthrough

Coming soon! This walkthrough will demonstrate setting up an a credential based softphone client with Telnyx. We'll also show you how to assign this connection to a newly purchased DID which will allow you to receive inbound calls. Then we'll walk you through how to assign the connection to an outbound profile such that you can make outbound calls!

CONFIGURING YOUR TELNYX MISSION CONTROL PORTAL

Step by Step Guide

For step by step instructions on each of the requirements on the Telnyx Mission Control Portal, please follow this guide.

Once you've configured your Telnyx account, you can now proceed to setup Zoiper following the guide below.

VoIP Account Creation Zoiper Step by Step

Step by Step Guide

Once Zoiper 3 is installed and downloaded, you can then proceed to create your VoIP account on your new softphone. 

Settings

As seen in the picture below, there is a settings drop down menu on the top right. Select this and choose create a new account.

You'll want to select the account type as SIP and click next.

Next, you'll want to enter in the username and password you obtained from your credentials based connection you created on your Telnyx Mission Control Portal account.

Account Wizard

  • User / User@host : username of your credentials based connection.
  • Password : password of your credentials based connection.
  • Domain / Outbound proxy:  sip.telnyx.com.

Click Next and then enter the name that you'd like to give this VoIP account on Zoiper 3.

Once you select next, the softphone will send a registration request to our sip proxy (sip.telnyx.com). If the username and password match your credentials based connection, the registration will be successful and you can then start to make and receive calls!

Additional Resources

Review our getting started with guide to make sure your Telnyx Mission Control Portal account is setup correctly!

Checkout Zoipers help section for extra support!

Can't find what you're looking for?

Our knowledge base is currently undergoing a makeover which will include more up to date videos to match our ever growing platform!

Can't find what you're looking for? Click the chat bubble at your lower right hand corner and start a chat!

Did this answer your question?