How to configure a Vicidial IP trunk

Our focus in this article is to achieve the connection between your Vicidial server, and our Mission Control Portal. We will describe a sample configuration of the OUTBOUND, and INBOUND trunk assuming that you already made the main Vicidial installation and telecommunication-applications deployment.

Your configuration is ready to go on our side! We can move forward with the configurations on your Vicidial trunk:

  • Log into the Vicidial web portal and going to Admin==>Carriers==>Add new carrier.
  • Enter the following information:
    Carrier ID: Telnyx
    Carrier Name: telnyx
    Registration String : leave blank.
    Template ID: NONE


    Account Entry:
    [telnyx]
    disallow=all
    allow=ulaw
    allow=g729
    type=peer
    insecure=port,invite
    host=sip.telnyx.com
    dtmfmode=rfc2833
    context=default



    Protocol: SIP
    Global String: Telnyx=SIP/telnyx

    Dial Plan:
    exten => _9NXXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
    exten => _9NXXXXXXXXXX,2,Dial(${Telnyx}/${EXTEN:1},60,tTor)
    exten => _9NXXXXXXXXXX,3,Hangup


    In this case, 9 is the prefix that will be dialed to send calls to Telnyx's trunk.

Can't find what you're looking for? Click the chat bubble at your lower right hand corner and start a chat!

Did this answer your question?